Wiha 45219 Clamp meter up to 1,000 V AC, CAT IV incl. 2x AAA batteries

Product dimensions: 280 x 110 x 50 mm (LxWxD)

Application: For multi-functional use in different application locations.

Measuring category: CAT IV 1.000 V

Suitable for eMobility

Suitable for photovoltaic systems

1,000 V AC / 1,500 V DC, 400 Amp

Cat IV, 1,000 V

Safe measuring without direct contact

Without electrical circuit interruption

When working, for example, on electrical systems that cannot be switched off, current measurement is a major challenge. With the measuring caliper from Wiha, the caliper bracket can be used to carry out measurements without interrupting the electrical circuit. Handling is greatly facilitated by the remote single-hand testing. The test tips allow additional tests, voltage measurement in the AC and DC range, as well as resistance, frequency, and capacity measurements. They also allow continuity and diode tests. This multi-functionality significantly increases the efficiency. A large LCD display with background illumination and data hold function makes the measurement results immediately readable even beyond the measurement process. An additional signal sound indicates the current flow during the continuity check. In addition, the measuring caliper from Wiha has an integrated flashlight function, providing optimal illumination conditions even in poorly lit work environments. The LPF function, coupled with the True-RMS function increase the process safety of your test by providing interference-free effective values. According to the measurement category CAT IV up to 1,000 V the measuring caliper offers maximum safety for working directly on the sources of low-voltage installations.

IEC/EN 61010-1, IP40