Performance iN Lighting 3119476 LED-High power floodlight 4000K 1060W static 2CH asymmetric Intensive reflector

High-powered LED floodlight for indoor and outdoor, comprising: Die-cast aluminium bearing structure polyester powder coat finish ISO 9227/12944 - ISO 9223 (C5). UV and heat stabilised, technopolymer diffuser with integral custom moulded optics. High-transparency polycarbonate optics. Anti-ageing custom moulded silicone sealing gasket(s) with resilient elastic return capacity. Ultra-high efficiency anodised extruded aluminium heat sink. The superior heat dissipation provided by the extruded aluminium heat sink allows a maximum luminaire operating temperature of 50°C, without dimming down the system. Die-cast aluminium electrical connection box polyester powder coat finish ISO 9227/19244 - ISO 9233 (C5). Electrical connection through a 1.5-meter piece of H07RN-F 7G1.5 cable, allowing the electrical connection without opening the luminaire body. The electrical connection, with the cable coming from the power supply unit, must be made using a suitable waterproof system (e.g. junction box) with at least IP66 protection rating. Light beam obtained by the combination of multiple LED modules. Die-cast aluminium bracket, polyester powder coat prior surface chemical conversion. Galvanised powder-coated steel bracket (LASER+ 10). Stainless steel locking hardware. All LASER+ power consumption includes power unit losses. Integral graduated goniometer for aiming purposes. For LASER+ 20/30 models use only the power supply units available as accessories (ordered separately). IP66-rated power control gears available in DALI and DMX-RDM. Maximum distance of 100 m cable length between control gear and luminaire. Correctly match the floodlight with the control gear. Pay attention to the models and the number of connection channels: two (2CH) and three (3CH). Integral surge protection device (SPD) against mains overvoltages up to 10 kV (CM/DM). Integral control gearbox, placed in a powder-coated, sheet metal compartment. Mains connection trough M25x1.5 anti-tearing cable gland in polyamide box, for cables Ø 9 - Ø 16 mm (LASER+ 10 models). Integral DALI or DMX 512-RDM drivers depending on models (LASER+ 10). The LASER+ 10 versions are complete with additional surge protection device (SPD) up to 10 kV (CM/DM). Other colour temperatures (CCT) and colour rendering index (CRI) options available. Consult factory. For up lighting installation, consult factory. Design by GIORGIO LODI.