Performance iN Lighting 3117734 LED-Street Lighting 3000K 46W D4i ZHAGA road reflector

Series of LED street lighting luminaires, ,comprising:. Die-cast aluminium housing, polyester powder coat finish ISO 9227/12944 - ISO 9223 (C5). Coated die-cast aluminium captive trim, hinged to the housing. Coated die-cast aluminium pole-top adaptor for pole Ø 60. 76 mm. High-transparency polycarbonate optics. The Secure Light Distribution (SLD) system guarantees uniform light distribution even in the remote case of LED failures. Anti-ageing custom moulded silicone sealing gasket(s) with resilient elastic return capacity. Extra clear, toughened, flat glass diffuser. The integral switch splitter automatically disconnects the driver from mains when opened. Built-in driver. Integral surge protection device (SPD) against mains overvoltages up to 10 kV (CM/DM). Stainless steel locking hardware. Complete with 1 m H07RN-F 2x1.5 mm² or H07RN-F 4x1.5 mm² (dimmable options) cable, for mains connection without opening the luminaire. StReet optic options: SR/075 usually for narrow roads (0.5 ≥ L/H ≥ 0.75), SR/100 for two-lane roads (L/H = 1), SR/125 for wide streets and (L/H = 1.25), SR/150 for wide roads/parking lots (L/H = 1.5) schemes. L/H ratio (L-road width/H-pole height). UNI 10819 light pollution standards compliant (0% ULOR rating). Complete with NEMA socket connected to DALI driver and waterproof short-circuit cap for On/Off operation mode and SMART-compatible mounting solutions (NEMA options). The ZHAGA versions are complete with a ZHAGA SOCKET located on the upper part of the appliance (ZHU - position UP) or positioned both in the upper and lower part of the appliance (ZHUD - Position UP + position DOWN) and D4i driver. They are installation-ready for "Radio Frequency node" solutions, twilight sensors, and other types of compatible sensors. The versions of ZHAGA with ZHAGA SOCKET positioned in both the upper and lower part of the appliance can work with either a pair of devices or with only one device positioned in one of the two sockets. Other colour temperatures (CCT) and colour rendering index (CRI) options available. Consult factory. Third-party controls NEMA 7-pin socket options available. Consult factory. CLO (Constant Light Output) options available. Consult factory. Design by SILVIA PAOLA PENNACCHIO.