Cimco 170378 1,000 V leather tool case Electrical safety

Tool assortment VDE tool sheath.Tool case made of strong cowhide especially for safety tools and protective devices, all outer edges reinforced with aluminum angles. The side parts, front and back wall as well as the bottom and lid are extra reinforced. The front and rear walls can be opened at an angle of 90°. The case is further equipped with: Lockable plug-in locks, side locks, heavy duty cleated carrying handle, numerous tool pockets, side loops for shoulder straps, bottom glides additionally with document front pocket, fold-down back panel, fold-down compartment for small parts, partition wall, foam insert with recesses for socket inserts, as well as an extra safe storage of electrician's safety gloves and a NH safety handle, due to two reinforced partitions. The VDE tool bag, in signal red (CIMCO item no. 17 0078) is completely equipped with 53 tools, with 1x each: Flat nose pliers, plastic, 200 mm (10 0796), Telephone pliers with straight jaws 200 mm, DIN ISO 5745 (10 8778), Telephone pliers with curved jaws 200 mm, DIN ISO 5745 (10 8780) Combination pliers with flat jaws 185 mm, DIN ISO 5746 (10 8782), Power side cutter 200 mm, DIN ISO 5749, soft and hard wires (10 8784), Stripping pliers with adjusting screw, 160 mm, for conductors 0.75 - 6 mm² (10 8790), Offset screwdriver SW 5, DIN EN 60900/VDE 0680 Part 2 (11 0804), Offset screwdriver SW 6, DIN EN 60900/VDE 0680 Part 2 (11 0806), Voltage tester up to 690 V, LED display (11 1432), Socket set DIN 7448, SW 10, 1/2" square drive (11 2600), Socket set DIN 7448, SW 11, 1/2" square drive (11 2602), Socket set DIN 7448, SW 13, 1/2" square drive (11 2606), Socket set DIN 7448, SW 14, 1/2" square drive (11 2608) Socket DIN 7448, SW 17, 1/2" square drive, Socket DIN 7448, SW 19, 1/2" square drive (11 2612), Reversible ratchet, 1/2" (11 2628), Cross handle, 1/2 inch (11 2650), open-end wrench SW 10 105 mm, DIN 7446, 15° offset (11 2708), open-end wrench SW 13 132 mm, DIN 7446, 15° offset (11 2714) Open-end wrench SW 17 16 mm, DIN 7446, 15° cranked (11 2720),Open-end wrench SW 19 170 mm, DIN 7446, 15° cranked (11 2722),Open-end wrench SW 22 195 mm, DIN 7446, 15° cranked (11 2724), Slotted screwdriver, DIN EN 60900, 2.5x0.4 mm, 160 mm (11 7701),Screwdriver, slotted, DIN EN 60900, 4.0x0.8 mm, 185 mm (11 7704),Screwdriver, slotted, DIN EN 60900, 6.5x1.2 mm, 245 mm (11 7706),Screwdriver, slotted, DIN EN 60900, 8.0x1.2 mm, 285 mm (11 7708),Cross-recess, 80 mm PH 1 DIN 7438 (11 7731), Cross-recess screwdriver, 100 mm, PH 2, DIN 7438 (11 7732), Socket wrench 220 mm DIN 7445, 5.5x125 mm (11 7805), Socket wrench 235 mm DIN 7445, 7.0x125 mm (11 7807), Socket wrench 235 mm DIN 7445, 8,0x125 mm (11 7808), Socket wrench 235 mm DIN 7445, 10,0x125 mm (11 7810), One-hand cable shears 160 mm for cables up to 16 mm (12 0206),Safety cable knife, straight, strong blade, 50 mm (12 1042), 5xProtective plug-in grommet size 1 receptacle 10 mm max. ø (14 0166), 5x protective slip-on grommet, size 2, for 10 mm max. ø (14 0168), 5x protective slip-on grommet, size 3, for 10 mm max. ø (14 0170), 2x plastic clamp, 160 mm (14 0180), electrical protective gloves, size 10, length 410 mm, material thickness 1.0 mm (14 0214), insulating tape universal DIN EN 60454, color red 25 mmx25 m (16 0145). Weight 13,500 g, external dimensions W/D/H: 480/220/380 mm.