Schneider Electric BSH1001P11F2A Lexium BSH - servo-moteur - 2,7N.m - clavette IP50 - 100mm - monotour - frein

The BSH servomotor from the Lexium 32 servo drive series. This BSH series of three-phase AC servomotors features a low rotor inertia, enabling high acceleration capability for dynamic applications. Thanks to winding technology, a higher power density in a compact design is achieved. This servo has a nominal continuous stall torque of 3.3 Nm and reaches a peak torque of 9.6 Nm. Depending on the supply voltage, its rated speed is up to 6000 rpm. A voltage-dependent continuous output power of up to 1630 W is achieved. The built-in encoder is implemented as a single-turn with 128 periods/revolution (128x1024) as SinCos Hiperface. The electrical connection is made via 2x M23 connectors, angled by 90° and rotatable. The motor flange for mounting is 100 mm. The drive shaft has a diameter of 19 mm. The shaft end is equipped with a keyway and complies with protection class IP54. The motor housing has a protection rating of IP65. An integrated holding brake is included. For the operation of the synchronous motor, the servo amplifiers of the Lexium series LXM32 are recommended. With the Green Premium eco-label, you can receive detailed information on material contents, environmental impacts, and recycling that support your sustainability goals.