Schneider Electric BMH1002T32A2A MOTEUR 100MM IEC 6,2NM IP65 1700W CLAV. ENC. SINCOS MULTIT.128 CONN.ANG.

Servo motor BMH from the Lexium 32 servo drive series. The BMH series of three-phase AC servo motors has a medium rotor inertia and is perfectly adapted for applications with high loads. Thanks to the winding technology, a very high power density is achieved in a compact design. This servo has a nominal continuous stall torque of 6.1 Nm and achieves a peak torque of 18.3 Nm. Its nominal speed, depending on the supply voltage, is up to 3500 rpm. This results in a voltage-dependent continuous output of up to 1760 W. The built-in encoder is implemented as a multiturn with 128 cycles/revolution (128x1024x4096) as SinCos Hiperface. The electrical connection is made via 2x M23 connectors, angled and rotatable by 90 degrees. For mounting, the motor flange is 100 mm. The drive shaft has a diameter of 19 mm. The shaft end is designed as a feather key and complies with protection class IP65. The motor housing complies with protection class IP65. There is no holding brake available. For the operation of the synchronous motor, the servo amplifiers of the Lexium series LXM32 are recommended. Thanks to the Green Premium eco-label, you can obtain detailed information on material contents, environmental impacts, and circular economy that support your sustainability goals.