Schneider Electric BMH1002T01A2A Lexium - Moteur 100mm iec 6nm ip54 1700w lisse enc. sincos monot.128 conn.ang.

Servo motor BMH from the Lexium 32 servo drive series. The BMH series of three-phase AC servo motors features a medium rotor inertia and is perfectly adapted for applications with high loads. Thanks to the winding technology, a very high power density is achieved in a compact design. This servo has a nominal continuous stall torque of 6.1 Nm and reaches a peak torque of 18.3 Nm. Its nominal speed, depending on the supply voltage, is up to 3500 rpm. A voltage-dependent nominal power of up to 1760 W can be achieved. The built-in encoder is designed as a single turn with 128 cycles/revolution (128x1024) as SinCos Hiperface. The electrical connection is made via 2x M23 connectors, angled at 90 degrees and rotatable. The motor flange for mounting is 100 mm. The drive shaft has a diameter of 19 mm. The shaft end is smooth and complies with protection class IP54. The motor housing corresponds to protection class IP65. There is no holding brake. Lexium series LXM32 servo amplifiers are recommended for operating the synchronous motor. Thanks to the Green Premium eco-label, you can receive detailed information about material contents, environmental impact, and closed-loop economy, which support your sustainability goals.