Schneider Electric BMH1001T07F1A MOTEUR 100MM IEC 3,6NM IP54 1100W LISSE ENC. SINCOS MULTIT.16 CONN.DROIT FREIN

Servo motor BMH from the Lexium 32 servo drive series. The BMH series of three-phase AC servo motors is characterized by a medium rotor moment of inertia and is perfectly adapted for applications with high loads. Thanks to the winding technology, there is a very high power density in a compact design. This servo has a nominal holding torque of 3.4 Nm and reaches a peak torque of 10.2 Nm. Its nominal speed, depending on the supply voltage, is up to 4000 rpm. It has a voltage-dependent nominal power of up to 1200 W. The built-in encoder is designed as a multiturn with 16 periods per revolution (16x1024x4096) as a SinCos Hiperface. The electrical connection is made using 2x M23 connectors in a straight design. The motor flange for mounting is 100 mm. The drive shaft has a diameter of 19 mm. The shaft end is smooth and conforms to the IP54 protection rating. The motor housing corresponds to the IP65 protection standard. A holding brake is integrated. For the operation of the synchronous motor, the servo amplifiers of the Lexium series LXM32 are recommended. Thanks to the Green Premium eco-label, you can obtain detailed information on material contents, environmental impacts, and circular economy that support your sustainability goals.