Schneider Electric BMH0702P11F1A MOTEUR 70MM IEC 2,5NM IP54 700W CLAV. ENC. SINCOS MONOT.128 CONN.DROIT FREIN

The BMH series servo motor from the Lexium 32 range of servo drives. The BMH series of three-phase AC servo motors has a medium rotor inertia and is perfectly adapted for applications with high loads. Thanks to the winding technology, there is a very high power density in a compact design. This servo has a nominal continuous stall torque of 2.48 Nm and achieves a peak torque of 7.44 Nm. Its rated speed depends on the supply voltage and is up to 7000 rpm. The resulting voltage-dependent rated power is up to 1380 W. The built-in encoder is designed as a single turn with 128 periods/revolution (128x1024) as SinCos Hiperface. The electrical connection is made via 2x M23 connectors in a straight design. For mounting, the motor flange is 70 mm. The drive shaft has a diameter of 11 mm. The shaft end is designed as a feather key and is compliant with the protection class IP54. The motor housing has a protection class of IP65. A holding brake is integrated. For the operation of the synchronous motor, the Lexium series LXM32 servo amplifiers are recommended. Thanks to the Green Premium eco-label, you can get detailed information about material contents, environmental impacts, and circular economy, supporting your sustainability goals.