Schneider Electric BMH0701T17A2A Lexium - Moteur 70mm iec 1,4nm ip54 400w clav. enc. sincos multit.16 conn.ang.

Servo motor BMH from Lexium 32 servo drive series. The BMH range of three-phase AC servo motors features a medium rotor moment of inertia and is perfectly adapted for applications with high loads. Thanks to the winding technology, a very high power density is achieved in a compact design. This servo has a nominal holding torque of 1.4 Nm and achieves a peak torque of 4.2 Nm. Its rated speed is up to 5000 rpm depending on the supply voltage. A corresponding rated power of up to 680 W is achieved depending on the supply voltage. The built-in encoder is designed as a multiturn with 16 periods per revolution (16x1024x4096) as SinCos Hiperface. The electrical connection is made via 2x M23 connectors, angled at 90° and rotatable. For mounting, the motor flange is 70 mm. The drive shaft has a diameter of 11 mm. The shaft end is designed as a keyway and conforming to the IP54 protection class. The motor housing corresponds to the protection class IP65. It does not have a holding brake. For the operation of the synchronous motor, the Lexium series LXM32 servo amplifiers are recommended. Thanks to the Green Premium eco-label, you can receive detailed information about material contents, environmental impacts, and the circular economy, which support your sustainability goals.