Schneider Electric BMH0701T16F1A MOTEUR 70MM IEC 1,4NM IP54 400W CLAV. ENC. SINCOS MONOT.16 CONN.DROIT FREIN

The BMH servomotor from the Lexium 32 range of servo drives. The BMH series of three-phase AC servomotors features a medium rotor inertia and is perfectly adapted for applications with high loads. Thanks to the winding technology, it results in a very high power density in a compact design. This servo has a nominal continuous stall torque of 1.4 Nm and achieves a peak torque of 4.2 Nm. Its nominal speed depends on the supply voltage and can reach up to 5000 rpm. This results in a voltage-dependent nominal power of up to 680 W. The built-in encoder is designed as a single turn with 16 periods/revolution (16x1024) as SinCos Hiperface. The electrical connection is made via 2x M23 connectors in a straight design. For mounting, the motor flange is 70 mm. The drive shaft has a diameter of 11 mm. The shaft end is designed as a keyway and conforms to the IP54 protection type. The motor housing meets the IP65 protection level. An integrated holding brake is included. For operating the synchronous motor, the Lexium series LXM32 servo amplifiers are recommended. Thanks to the Green Premium eco-label, you can get detailed information about material content, environmental impacts, and circular economy to support your sustainability goals.