Schneider Electric BSH1404P12A2P Servo motor BSH - IEC 140 mm - 32,1 Nm - 3000 rpm -eje c chaveta -sin freno -doble conector acodado orientable -encoder abs MT 128b SinCos -IP54

Servo motor BSH of the Lexium 32 servo drive series. This BSH series of three-phase AC servo motors features low rotor inertia, enabling high acceleration capability for dynamic applications. Thanks to the winding technology, a higher power density is achieved in a compact design. This servo has a nominal continuous stall torque of 33.4 Nm and achieves a peak torque of 131.9 Nm. Its rated speed is up to 3600 rpm, depending on the supply voltage, resulting in a voltage-dependent rated power of up to 4190 W. The built-in encoder is designed as a multiturn with 128 periods/revolution (128x1024x4096) as SinCos Hiperface. The electrical connection is made via connectors M40 + M23, angled at 90° and rotatable. For mounting, the motor flange is 140 mm. The drive shaft has a diameter of 24 mm. The shaft end is equipped with a feather key and conforms to protection class IP54. The motor casing corresponds to the protection class IP65. There is no holding brake present. For the operation of the synchronous motor, the servo amplifiers of the Lexium series LXM32 are recommended. Thanks to the Green Premium eco-label, you can obtain detailed information about material contents, environmental impacts, and the circular economy, which support your sustainability goals.