Schneider Electric BSH1402T31A2P Servo motor BSH - IEC 140 mm - 14,4 Nm - 3000 rpm -eje c chaveta -sin freno -doble conector acodado orientable -encoder abs ST 128b SinCos -IP65/IP67

Servo motor BSH from the Lexium 32 servo drive range. This BSH series of three-phase AC servo motors has low rotor inertia, which enables high acceleration capability for dynamic applications. Thanks to winding technology, a higher power density is achieved in a compact design. This servo has a nominal continuous stall torque of 19.5 Nm and achieves a peak torque of 60.1 Nm. Depending on the supply voltage, its rated speed is up to 3600 rpm. There is a voltage-dependent nominal power of up to 3660 W. The built-in encoder is designed as a single turn with 128 periods/revolution (128x1024) as SinCos Hiperface. The electrical connection is made via connectors M40 + M23, angled at 90° and rotatable. For mounting, the motor flange is 140 mm. The drive shaft has a diameter of 24 mm. The shaft end is equipped with a keyway and conforms to protection type IP65. The motor housing corresponds to the protection type IP65. There is no holding brake. For the operation of the synchronous motor, the Lexium series LXM32 servo amplifiers are recommended. Thanks to the Green Premium eco-label, you can obtain detailed information on material contents, environmental impacts, and the circular economy that support your sustainability goals.