Schneider Electric BSH1402T21F2P Servo motor BSH - IEC 140 mm - 14,4 Nm - 3000 rpm -eje liso -con freno -doble conector acodado orientable -encoder abs ST 128b SinCos -IP65/IP67

The BSH series servo motor is part of the Lexium 32 range of servo drives. This series of three-phase AC servo motors has a low rotor inertia, enabling high acceleration capability for dynamic applications. Thanks to the winding technology, a higher power density is achieved in a compact design. This servo has a rated continuous stall torque of 19.5 Nm and can reach a peak torque of 60.1 Nm. Its rated speed depends on the supply voltage and can go up to 3600 RPM. The voltage-dependent rated power can go up to 3660 W. The built-in encoder is configured as a single-turn with 128 periods per revolution (128x1024) as a SinCos Hiperface. The electrical connection is made through connectors M40 + M23, rotated and swiveled by 90 degrees. The mounting flange for the motor is 140 mm. The drive shaft has a diameter of 24 mm. The shaft end is smooth and conforms to the IP65 protection class. The motor housing is also IP65 protected. A holding brake is integrated. For the operation of the synchronous motor, the Lexium range LXM32 servo amplifiers are recommended. Thanks to the Green Premium eco-label, you can receive detailed information on material contents, environmental impacts, and circular economy that support your sustainability goals.