Schneider Electric BSH1004P32F2A Servo motor BSH - IEC 100 mm - 9,3 Nm - 1500 rpm -eje c chaveta -con freno -doble conector acodado orientable -encoder abs MT 128b SinCos -IP65/IP67

Servo motor BSH from the Lexium 32 servo drive range. This BSH series of three-phase AC servo motors features low rotor inertia, enabling high acceleration capability for dynamic applications. Thanks to winding technology, a higher power density results in a compact design. This servo has a nominal continuous stall torque of 10 Nm and achieves a peak torque of 40.5 Nm. Its nominal speed, depending on the supply voltage, can reach up to 3600 RPM. There is a voltage-dependent nominal power output of up to 2.6 kW. The built-in encoder is designed as a multiturn with 128 periods/revolution (128x1024x4096) as SinCos Hiperface. Electrical connection is made via 2x M23 connectors, rotated and pivotable by 90 degrees. For mounting, the motor flange is 100 mm. The drive shaft has a diameter of 24 mm. The shaft end is executed with a feather key and conforms to protection class IP65. The motor housing corresponds to the protection class IP65. A holding brake is integrated. For operating the synchronous motor, the servo amplifiers of the Lexium series LXM32 are recommended. Thanks to the Green Premium eco-label, you can obtain detailed information on material contents, environmental impacts, and circular economy, supporting your sustainability goals.