Schneider Electric BSH1002T11A2A Servo motor BSH - IEC 100 mm - 5,5 Nm - 4000 rpm -eje c chaveta -sin freno -doble conector acodado orientable -encoder abs ST 128b SinCos -IP54

Servo motor BSH from the Lexium 32 series of servo drives. This BSH series of three-phase AC servo motors features a low rotor inertia moment, enabling high acceleration capabilities for dynamic applications. Thanks to the winding technology, a higher power density is achieved in a compact design. This servo has a nominal holding torque of 5.8 Nm and reaches a peak torque of 18.3 Nm. Its rated speed depends on the supply voltage and can go up to 4800 rpm. A voltage-dependent rated power of up to 2210 W can be achieved. The built-in encoder is implemented as a single-turn with 128 periods/revolution (128x1024) in SinCos Hiperface design. The electrical connection is made via 2x M23 connectors, which are angled at 90° and are rotatable. For mounting, the motor flange measures 100 mm. The drive shaft has a diameter of 19 mm. The shaft end is equipped with a keyway and conforms to the IP54 protection rating. The motor housing corresponds to the IP65 protection rating. There is no holding brake present. For the operation of the synchronous motor, we recommend the Lexium series LXM32 servo amplifiers. Thanks to the Green Premium eco-label, you can receive detailed information on material contents, environmental impacts, and circular economy that support your sustainability goals.