Schneider Electric BSH1001T21A2A Servo motor BSH - IEC 100 mm - 3,4 Nm - 4000 rpm -eje liso -sin freno -doble conector acodado orientable -encoder abs ST 128b SinCos -IP65/IP67

Servomotor BSH from the Lexium 32 range of servo drives. This BSH series of three-phase AC servo motors has a low rotor inertia, which enables high acceleration capability for dynamic applications. Thanks to the winding technology, a higher power density is achieved in a compact design. This servo has a nominal continuous standstill torque of 3.3 Nm and reaches a peak torque of 9.6 Nm. Its nominal speed depends on the supply voltage and can be up to 6000 rpm. Depending on the voltage, a nominal power of up to 1630 W can be achieved. The built-in encoder is designed as a single turn with 128 periods/revolution (128x1024) as SinCos Hiperface. The electrical connection is made via connectors 2x M23, angled at 90° and rotatable. The motor flange for mounting is 100 mm. The drive shaft has a diameter of 19 mm. The shaft end is smooth and conforms to protection class IP65. The motor housing meets the IP65 protection standard. There is no holding brake present. For the operation of the synchronous motor, we recommend the servo amplifiers of the Lexium series LXM32. Thanks to the Green Premium eco-label, you can get detailed information about material contents, environmental impacts, and circular economy that support your sustainability goals.