Schneider Electric BSH0702P31F1A Servo motor BSH - IEC 070 mm - 2,1 Nm - 3000 rpm -eje c chaveta -con freno -doble conector recto -encoder abs ST 128b SinCos -IP65/IP67

Servomotor BSH of the Lexium 32 servo drive series. This BSH series of three-phase AC servo motors features low rotor inertia, enabling high acceleration capability for dynamic applications. Thanks to the winding technology, a higher power density is achieved in a compact design. This servo has a nominal continuous stall torque of 2.2 Nm and reaches a peak torque of 7.6 Nm. Its rated speed, depending on the supply voltage, is up to 7200 rpm. This results in a voltage-dependent rated power of up to 1360 W. The built-in encoder is executed as a single-turn with 128 periods per revolution (128x1024) as SinCos Hiperface. The electrical connection is made via 2x M23 connectors in a straight design. For mounting, the motor flange measures 70 mm. The drive shaft has a diameter of 11 mm. The shaft end is equipped with a keyed design and complies with the IP65 protection type. The motor housing is also IP65 rated. An integral holding brake is included. For the operation of the synchronous motor, the servo amplifiers of the Lexium series LXM32 are recommended. Thanks to the Green Premium eco-label, you can obtain detailed information on material contents, environmental impacts, and the circular economy to support your sustainability goals.