Schneider Electric BSH0701T21F2A Servo motor BSH -IEC 070 mm -0,7 Nm -8000 rpm -eje liso -con freno -doble conector acodado orientable - encoder abs ST 128b SinCos -IP65/IP65

The BSH servomotor from the Lexium 32 range of servo drives. This series of BSH three-phase AC servomotors features a low rotor inertia, enabling high acceleration capability for dynamic applications. Thanks to winding technology, a higher power density is achieved in a compact design. This servo has a nominal continuous stall torque of 1.4 Nm and achieves a peak torque of 3.5 Nm. Its rated speed depends on the supply voltage and can reach up to 7200 RPM. A voltage-dependent rated power of up to 950 W is achieved. The built-in encoder is executed as single turn with 128 periods per revolution (128x1024) as SinCos Hiperface. The electrical connection is made via connectors 2x M23, angled at 90 degrees and rotatable. For mounting, the motor flange is 70 mm. The drive shaft has a diameter of 11 mm. The shaft end is smooth and conforms to the IP65 protection type. The motor housing is also IP65 protected. A holding brake is integrated. For the operation of the synchronous motor, the Lexium range LXM32 servo amplifiers are recommended. Thanks to the Green Premium environmental label, you can obtain detailed information about material contents, environmental impacts, and circular economy to support your sustainability goals.