Schneider Electric BSH0701P12F2A Servo motor BSH - IEC 070 mm - 1,4 Nm - 3000 rpm -eje c chaveta -con freno -doble conector acodado orientable -encoder abs MT 128b SinCos -IP54

Servo motor BSH of the Lexium 32 servo drive series. This BSH series of three-phase AC servo motors has a low rotor inertia, enabling high acceleration capability for dynamic applications. Thanks to the winding technology, a higher power density is achieved in a compact design. This servo has a nominal holding torque of 1.4 Nm and achieves a peak torque of 3.5 Nm. Its nominal speed, depending on the supply voltage, is up to 7200 rpm. A voltage-dependent nominal power of up to 950 W can be obtained. The built-in encoder is implemented as a multiturn with 128 periods per revolution (128x1024x4096) as SinCos Hiperface. The electrical connection is made via connectors 2x M23, angled by 90° and rotatable. For mounting, the motor flange is 70 mm. The drive shaft has a diameter of 11 mm. The shaft end is equipped with a keyway and compliant with the protection class IP54. The motor housing is in accordance with protection class IP65. A holding brake is integrated. For the operation of the synchronous motor, the Lexium series LXM32 servo amplifiers are recommended. Thanks to the Green Premium eco-label, you can receive detailed information on material contents, environmental impacts, and the circular economy that support your sustainability goals.