Schneider Electric BSH0553T31A2A Servo motor BSH - IEC 055 mm - 1,3 Nm - 3000 rpm -eje c chaveta -sin freno -doble conector acodado orientable -encoder abs ST 128b SinCos -IP65/IP67

BSH servo motor from the Lexium 32 servo drive series. This BSH series of three-phase AC servo motors features low rotor inertia, enabling high acceleration capability for dynamic applications. Thanks to the winding technology, there is a higher power density in a compact design. This servo has a nominal continuous stall torque of 1.2 Nm and a peak torque of 3.5 Nm. Its nominal speed depends on the supply voltage and can reach up to 9000 RPM. There is a voltage-dependent nominal power up to 970 W. The built-in encoder is designed as a single turn with 128 periods/revolution (128x1024) as SinCos Hiperface. The electrical connection is made via 2x M23 connectors, angled at 90 degrees and rotatable. For mounting, the motor flange is 55 mm. The drive shaft has a diameter of 9 mm. The shaft end is equipped with a keyway and conforms to protection class IP65. The motor housing conforms to protection class IP65. There is no holding brake. For operation of the synchronous motor, the Lexium series LXM32 servo amplifiers are recommended. Thanks to the Green Premium eco-label, you can get detailed information on materials content, environmental impact, and the circular economy that supports your sustainability goals.