Schneider Electric BSH0553T11F1A Servo motor BSH - IEC 055 mm - 1,3 Nm - 3000 rpm -eje c chaveta -con freno -doble conector recto -encoder abs ST 128b SinCos -IP54

Servomotor BSH from the Lexium 32 servo drive series. This BSH series of three-phase AC servo motors has low rotor inertia, enabling high acceleration capability for dynamic applications. Thanks to the winding technology, a higher power density is achieved in a compact design. This servo has a nominal continuous standstill torque of 1.2 Nm and achieves a peak torque of 3.5 Nm. Its rated speed is up to 9000 rpm, depending on the supply voltage. The resulting voltage-dependent rated power is up to 970 W. The built-in encoder is designed as a single turn with 128 periods/revolution (128x1024) as a SinCos Hiperface. The electrical connection is via connectors 2x M23 in straight design. For mounting, the motor flange is 55 mm. The drive shaft has a diameter of 9 mm. The shaft end is designed with a keyway and conforms to protection class IP54. The motor housing meets protection class IP65. A holding brake is integrated. For the operation of the synchronous motor, the Lexium series LXM32 servo amplifiers are recommended. Thanks to the Green Premium eco-label, you can get detailed information on material content, environmental impact and circular economy, which supports your sustainability goals.