Schneider Electric BSH0551T31A2A Servo motor BSH - IEC 055 mm - 0,5 Nm - 8000 rpm -eje c chaveta -sin freno -doble conector acodado orientable -encoder abs ST 128b SinCos -IP65/IP67

Servo motor BSH series of the Lexium 32 servo drives. This BSH series of three-phase AC servo motors features a low rotor inertia, enabling a high acceleration capability for dynamic applications. Thanks to the winding technology, a higher power density is achieved in a compact design. This servo has a nominal continuous stall torque of 0.5 Nm and reaches a peak torque of 1.5 Nm. Its rated speed, depending on the supply voltage, is up to 9000 rpm. The voltage-dependent rated power goes up to 440 W. The built-in encoder is designed as a single-turn with 128 periods/revolution (128x1024) as SinCos Hiperface. The electrical connection is made via connectors 2x M23, angled and rotatable by 90 degrees. For mounting, the motor flange is 55 mm. The drive shaft has a 9 mm diameter. The shaft end is equipped with a keyway and conforms to protection rating IP65. The motor housing meets the IP65 protection standard. There is no holding brake present. For the operation of the synchronous motor, the LXM32 series of servo amplifiers from Lexium is recommended. Thanks to the Green Premium eco-label, you can receive detailed information about material contents, environmental impacts and circular economy, which support your sustainability goals.