Schneider Electric BSH0551T22A1A Servo motor BSH - IEC 055 mm - 0,5 Nm - 8000 rpm -eje liso -sin freno -doble conector recto -encoder abs MT 128b SinCos -IP65/IP67

Servo motor BSH from the Lexium 32 range of servo drives. This BSH range of three-phase AC servo motors has a low rotor inertia, which allows for high acceleration capability for dynamic applications. Thanks to the winding technology, a higher power density is achieved in a compact design. This servo has a nominal continuous stall torque of 0.5 Nm and achieves a peak torque of 1.5 Nm. Its rated speed, depending on the supply voltage, is up to 9000 rpm. It results in a voltage-dependent rated power of up to 440 W. The built-in encoder is designed as multiturn with 128 periods/revolution (128x1024x4096) as SinCos Hiperface. The electrical connection is made via 2x M23 connectors in a straight design. For mounting, the motor flange is 55 mm. The drive shaft has a diameter of 9 mm. The shaft end is smooth and conforms to IP65. The motor housing is rated IP65. There is no holding brake. The Lexium series LXM32 servo amplifiers are recommended for the operation of the synchronous motor. Thanks to the Green Premium ecolabel, you can obtain detailed information on material contents, environmental impacts, and the circular economy, supporting your sustainability goals.