Schneider Electric BSH0551P22A1A Servo motor BSH - IEC 055 mm - 0,5 Nm - 4000 rpm -eje liso -sin freno -doble conector recto -encoder abs MT 128b SinCos -IP65/IP67

The BSH series servomotor is part of the Lexium 32 range of servo drives. This range of three-phase AC servo motors features low rotor inertia, which allows for high acceleration capability for dynamic applications. Thanks to the winding technology, a higher power density is achieved in a compact design. This servo has a nominal continuous stall torque of 0.5 Nm and achieves a peak torque of 1.5Nm. Its rated speed, depending on the supply voltage, can reach up to 9000 rpm. This results in a voltage-dependent rated power of up to 440W. The built-in encoder is a multiturn with 128 periods per revolution (128x1024x4096) executed as SinCos Hiperface. The electrical connection is made via 2x M23 connectors in a straight design. For mounting, the motor flange is 55mm. The drive shaft has a diameter of 9mm. The shaft end is smooth and complies with IP65 protection type. The motor housing also complies with IP65 protection type. There is no holding brake present. The LXM32 range of Lexium servo controllers is recommended for operating this synchronous motor. Thanks to the Green Premium eco-label, you can obtain detailed information on material content, environmental impact and circular economy that supports your sustainability goals.