Schneider Electric BSH0551P11F1A Servo motor BSH - IEC 055 mm - 0,5 Nm - 4000 rpm -eje c chaveta -con freno -doble conector recto -encoder abs ST 128b SinCos -IP54

Servo motor BSH series of Lexium 32 servo drives. This BSH series of three-phase AC servo motors has a low rotor inertia, which allows for high acceleration capability for dynamic applications. Thanks to the winding technology, there is a higher power density in a compact design. This servo has a nominal continuous standstill torque of 0.5 Nm and reaches a peak torque of 1.5 Nm. Its rated speed, depending on the supply voltage, is up to 9000 rpm. A voltage-dependent rated power of up to 440 W is achieved. The built-in encoder is designed as single-turn with 128 periods/revolution (128x1024) as SinCos Hiperface. The electrical connection is made via 2x M23 connectors in a straight design. For mounting, the motor flange is 55 mm. The drive shaft has a diameter of 9 mm. The shaft end is executed with a feather key and is conforming to protection class IP54. The motor housing corresponds to protection class IP65. A holding brake is integrated. For the operation of the synchronous motor, the servo amplifiers of the Lexium series LXM32 are recommended. The Green Premium eco-label allows you to obtain detailed information about material contents, environmental impacts, and circular economy to support your sustainability goals.