Schneider Electric BSH0402P37A2A Servo motor BSH -IEC 040 mm -0,38 Nm -9000 rpm -eje c chaveta -sin freno -doble conector acodado orientable - encoder abs MT 16b SinCos -IP65/IP65

Servo motor BSH series of the Lexium 32 servo drive range. This BSH series of three-phase AC servo motors features a low rotor inertia which allows for high acceleration capability for dynamic applications. Thanks to the winding technology, a higher power density is achieved in a compact design. This servo has a nominal continuous stall torque of 0.39 Nm and achieves a peak torque of 1.50 Nm. Its rated speed is up to 9000 rpm depending on the supply voltage. This results in a voltage-dependent rated power of up to 292 W. The built-in encoder is designed as multiturn with 16 periods/revolution (16x1024x4096) as SinCos Hiperface. The electrical connection is made via 2x Y-TEC connectors, angled at 90 degrees and rotatable. For mounting, the motor flange is 40 mm. The drive shaft has a diameter of 8 mm. The shaft end is designed with a keyway and conforms to protection class IP65. The motor housing is also rated IP65. There is no holding brake present. For operating the synchronous motor, the servo amplifiers of the Lexium series LXM32 are recommended. Thanks to the Green Premium eco-label, you can obtain detailed information on material contents, environmental impacts, and circular economy that support your sustainability goals.