Schneider Electric BMH2053P01A2A Servo motor BMH -IEC 205 mm -84 Nm -3800 rpm -eje liso -sin freno -doble conector acodado orientable - encoder abs ST 128b SinCos -IP65/IP65

Servo motor BMH from the Lexium 32 range of servo drives. The BMH series of three-phase AC servo motors have a medium rotor inertia moment and are perfectly adapted for applications with high loads. Thanks to the winding technology, there is a very high power density in a compact design. This servo has a nominal continuous stall torque of 88 Nm and reaches a peak torque of 330 Nm. Its rated speed is up to 2000 rpm depending on the supply voltage. There is a voltage-dependent rated output of up to 9.4 kW. The built-in encoder is designed as a single turn with 128 periods/revolution (128x1024) as SinCos Hiperface. The electrical connection is made via M40 and M23 connectors, angled at 90° and rotatable. The motor flange for mounting is 205 mm. The drive shaft has a diameter of 38 mm. The shaft end is smooth and conforms to protection class IP54. The motor housing is in accordance with protection class IP65. There is no holding brake present. For the operation of the synchronous motor, the Lexium series LXM32 servo amplifiers are recommended. Thanks to the Green Premium environmental label, you can obtain detailed information on material contents, environmental impacts, and circular economy that support your sustainability goals.