Schneider Electric BMH2051P26F1A Servo motor BMH - IEC 205 mm - 34,4 Nm - 3800 rpm -eje liso -con freno -doble conector recto -encoder abs ST 16b SinCos -IP65/IP67

The BMH servo motor from the Lexium 32 servo drive series. The BMH range of three-phase AC servo motors has a medium rotor inertia and is perfectly adapted for applications with high loads. Thanks to the winding technology, a very high power density is achieved in a compact design. This servo has a nominal continuous stall torque of 34.4 Nm and reaches a peak torque of 110 Nm. Its nominal speed depends on the supply voltage and can reach up to 3600 RPM. This results in a voltage-dependent nominal power of up to 6.75 kW. The built-in encoder is designed as single-turn with 16 periods/revolution (16x1024) as SinCos Hiperface. The electrical connection is made via M40 and M23 connectors in a straight design. The motor flange for mounting measures 205 mm. The drive shaft has a diameter of 38 mm. The end of the shaft is smooth and conforms to the protection class IP65. The motor housing corresponds to the protection class IP65. A holding brake is integrated. For the operation of the synchronous motor, the LXM32 series of servo drivers from Lexium is recommended. Thanks to the Green Premium eco-label, you can obtain detailed information about material contents, environmental impact, and circular economy, which will support your sustainability goals.