Schneider Electric BMH1402P26F2A Servo motor BMH - IEC 140 mm - 18,5 Nm - 4000 rpm -eje liso -con freno -doble conector acodado orientable -encoder abs ST 16b SinCos -IP65/IP67

The BMH servomotor from the Lexium 32 range of servo drives. The BMH series of three-phase AC servo motors features medium rotor inertia and is perfectly adapted for applications with high loads. Thanks to the winding technology, there is a very high power density in a compact design. This servo has a nominal continuous stall torque of 16.8 Nm and reaches a peak torque of 50.4 Nm. Its rated speed depends on the supply voltage, up to 3000 rpm. There is a voltage-dependent rated power up to 3550 W. The built-in encoder is designed as a single turn with 16 periods/revolution (16x1024) as SinCos Hiperface. The electrical connection is made via 2x M23 connectors, angled at 90° and rotatable. The mounting flange of the motor is 140 mm. The drive shaft has a diameter of 24 mm. The shaft end is smooth and complies with the IP65 protection standard. The motor housing also complies with the IP65 protection standard. An integrated holding brake is included. For the operation of the synchronous motor, the LXM32 series servo amplifiers from the Lexium range are recommended. Thanks to the Green Premium eco-label, you can get detailed information about material contents, environmental impacts, and circular economy that support your sustainability goals.