Schneider Electric BMH1003T06A1A Servo motor BMH - IEC 100 mm - 8,2 Nm - 6000 rpm -eje liso -sin freno -doble conector recto -encoder abs ST 16b SinCos -IP54

Servo motor BMH from the Lexium 32 servo drive series. The BMH series of three-phase AC servo motors has a medium rotor moment of inertia and is perfectly suited for high load applications. Thanks to the winding technology, a very high power density is achieved in a compact design. This servo has a nominal continuous stall torque of 7.5 Nm and reaches a peak torque of 25.5 Nm. Its rated speed is up to 3000 rpm, depending on the supply voltage. A voltage-dependent nominal power up to 2280 W is achieved. The built-in encoder is executed as single turn with 16 periods per rotation (16x1024) as SinCos Hiperface. The electrical connection is made via connectors 2x M23 in straight design. For mounting, the motor flange is 100 mm. The drive shaft has a diameter of 19 mm. The shaft end is smooth and compliant with the protection type IP54. The motor housing corresponds to the protection type IP65. There is no holding brake. For operating the synchronous motor, the Lexium series LXM32 servo amplifiers are recommended. Thanks to the Green Premium eco label, you can receive detailed information on material contents, environmental impacts, and circular economy that support your sustainability goals.