Schneider Electric BMH1002T17A2A Servo motor BMH -IEC 100 mm -6 Nm -6000 rpm -eje c chaveta -sin freno -doble conector acodado orientable - encoder abs MT 16b SinCos -IP65/IP65

Servo motor BMH of the Lexium 32 servo drives series. The BMH series of three-phase AC servo motors has a medium rotor moment of inertia and is perfectly adapted for applications with high loads. Thanks to the winding technology, a very high power density results in a compact design. This servo has a nominal continuous stall torque of 6.1 Nm and reaches a peak torque of 18.3 Nm. Its rated speed depends on the supply voltage and is up to 3500 rpm. This results in a voltage-dependent nominal power of up to 1760 W. The built-in encoder is designed as multiturn with 16 periods/revolution (16x1024x4096) as SinCos Hiperface. The electrical connection is made via connectors 2x M23, angled at 90° and rotatable. For mounting, the motor flange is 100 mm. The drive shaft has a diameter of 19 mm. The shaft end is designed as keyway and in compliance with protection type IP54. The motor housing corresponds to the protection type IP65. There is no holding brake available. For the operation of the synchronous motor, the Lexium series LXM32 servo amplifiers are recommended. Thanks to the Green Premium eco label, you can obtain detailed information on material contents, environmental impacts, and circular economy that support your sustainability goals.