Schneider Electric BMH1002P37F1A Servo motor BMH -IEC 100 mm -6,2 Nm -6000 rpm -eje c chaveta -con freno -doble conector recto - encoder abs MT 16b SinCos -IP65/IP65

Servo motor BMH from the Lexium 32 servo drive series. The BMH series of three-phase AC servo motors has a medium rotor moment of inertia and is perfectly adapted for applications with high loads. Thanks to the winding technology, there is a very high power density in a compact design. This servo has a nominal continuous standstill torque of 6.0 Nm and reaches a peak torque of 18.0 Nm. Its rated speed is up to 5000 rpm depending on the supply voltage. There is a voltage-dependent rated power up to 2270 W. The built-in encoder is designed as multiturn with 16 periods/revolution (16x1024x4096) as SinCos Hiperface. The electrical connection is made via 2x M23 connectors in a straight design. For mounting, the motor flange is 100 mm. The drive shaft has a diameter of 19 mm. The shaft end is designed as a Woodruff key and conforms to IP65 protection. The motor housing is IP65 rated. An integrated holding brake is included. For operating the synchronous motor, the LXM32 series servo amplifiers from the Lexium line are recommended. Thanks to the Green Premium eco-label, you can obtain detailed information about material contents, environmental impacts, and circular economy that support your sustainability goals.