Schneider Electric BMH1002P31A2A Servo motor BMH - IEC 100 mm - 6,2 Nm - 6000 rpm -eje c chaveta -sin freno -doble conector acodado orientable -encoder abs ST 128b SinCos -IP65/IP67

The BMH series servo motor from the Lexium 32 range of servo drives. The BMH series of three-phase AC servo motors has a medium rotor inertia and is perfectly suited for applications with high loads. Thanks to the winding technology, there is a very high power density in a compact design. This servo has a nominal continuous stall torque of 6.0 Nm and achieves a peak torque of 18.0 Nm. Its rated speed depends on the supply voltage and can go up to 5000 revolutions per minute. There is a voltage-dependent rated power of up to 2270 W. The built-in encoder is designed as Singleturn with 128 periods/revolution (128x1024) as SinCos Hiperface. Electrical connection is made via 2x M23 connectors, angled at 90 degrees and rotatable. For mounting, the motor flange is 100mm. The drive shaft has a diameter of 19mm. The shaft end is designed as a keyway and conforms to protection class IP65. The motor housing corresponds to the protection class IP65. There is no holding brake present. For operating the synchronous motor, the Lexium series LXM32 servo amplifiers are recommended. Thanks to the Green Premium eco-label, you can get detailed information about material contents, environmental impacts, and the circular economy that support your sustainability goals.