Schneider Electric BMH1002P27A1A Servo motor BMH - IEC 100 mm - 6,2 Nm - 6000 rpm -eje liso -sin freno -doble conector recto -encoder abs MT 16b SinCos -IP65/IP67

The BMH servo motor from the Lexium 32 servo drive series. The BMH series of three-phase AC servo motors has a medium rotor inertia and is perfectly adapted for applications with high loads. Thanks to the winding technology, it offers a very high power density in a compact design. This servo has a nominal continuous stall torque of 6.0 Nm and reaches a peak torque of 18.0 Nm. Its nominal speed can reach up to 5000 rpm, depending on the supply voltage. This yields a voltage-dependent nominal power of up to 2270 W. The built-in encoder is a multiturn with 16 periods/revolution (16x1024x4096) in SinCos Hiperface design. The electrical connection is made via 2x M23 connectors in straight design. For mounting, the motor flange is 100 mm. The drive shaft has a diameter of 19 mm. The shaft end is smooth and complies with protection class IP65. The motor housing complies with protection class IP65. There is no holding brake available. For operating the synchronous motor, the servo amplifiers from the Lexium series LXM32 are recommended. The Green Premium eco-label ensures that detailed information about material content, environmental impact, and the circular economy which can support your sustainability goals can be obtained.