Schneider Electric BMH1002P21A2A Servo motor BMH -IEC 100 mm -6,2 Nm -6000 rpm -eje liso -sin freno -doble conector acodado orientable - encoder abs ST 128b SinCos -IP65/IP65

Lexium 32 range BMH series servo motor. The BMH series of three-phase AC servo motors has a medium rotor moment of inertia and is perfectly adapted for high load applications. Thanks to the winding technology, it results in a very high power density in a compact design. This servo has a nominal continuous standstill torque of 6.0 Nm and achieves a peak torque of 18.0 Nm. Its nominal speed is up to 5000 rpm depending on the supply voltage. It has a supply-dependent nominal power up to 2270 W. The built-in encoder is executed as a single turn with 128 periods/revolution (128x1024) as SinCos Hiperface. The electrical connection is made via connectors 2x M23, angled by 90° and rotatable. For mounting, the motor flange is 100 mm. The drive shaft has a diameter of 19 mm. The shaft end is smooth and conforms to the protection rating IP65. The motor housing conforms to the protection rating IP65. No holding brake is present. For the operation of the synchronous motor, the servo amplifiers of the Lexium range LXM32 are recommended. Thanks to the Green Premium eco-label, you can get detailed information about material content, environmental impacts, and the circular economy that support your sustainability goals.