Schneider Electric BMH1002P01A1A Servo motor BMH - IEC 100 mm - 6,2 Nm - 6000 rpm -eje liso -sin freno -doble conector recto -encoder abs ST 128b SinCos -IP54

Servo motor BMH from the Lexium 32 servo drive series. The BMH series of three-phase AC servo motors has a medium rotor inertia and is perfectly adapted for applications with high loads. Thanks to winding technology, there is a very high power density in a compact design. This servo has a nominal continuous standstill torque of 6.0 Nm and reaches a peak torque of 18.0 Nm. Depending on the supply voltage, its rated speed is up to 5000 rpm. There results a voltage-dependent rated power up to 2270 W. The built-in encoder is designed as a single-turn with 128 periods/revolution (128x1024) as SinCos Hiperface. The electrical connection is made via 2x M23 connectors in a straight design. For mounting, the motor flange is 100 mm. The drive shaft has a diameter of 19 mm. The shaft end is smooth and designed according to the protection rating IP54. The motor housing complies with the protection class IP65. There is no holding brake present. For the operation of the synchronous motor, the servo amplifiers of the Lexium series LXM32 are recommended. Thanks to the Green Premium eco-label, you can obtain detailed information on material contents, environmental impacts, and the circular economy that support your sustainability goals.