Schneider Electric BMH1001T26A1A Servo motor BMH -IEC 100 mm -3,4 Nm -6000 rpm -eje liso -sin freno -doble conector recto - encoder abs ST 16b SinCos -IP65/IP65

Servo motor BMH from the Lexium 32 servo drive series. The BMH series of three-phase AC servo motors has a medium rotor inertia and is perfectly adapted for applications with high loads. Thanks to the winding technology, there is a very high power density in a compact design. This servo has a nominal continuous stall torque of 3.4 Nm and achieves a peak torque of 10.2 Nm. Its rated speed is up to 4000 RPM depending on the supply voltage. There is an associated nominal output power up to 1200 W depending on the voltage. The built-in encoder is designed as a single-turn with 16 periods per revolution (16x1024) in SinCos Hiperface. The electrical connection is via 2x M23 connectors in a straight design. The motor flange for mounting is 100 mm. The drive shaft has a diameter of 19 mm. The shaft end is smooth and designed in accordance with protection class IP65. The motor housing also meets IP65 protection. There is no holding brake. For the operation of the synchronous motor, the Lexium series LXM32 servo amplifiers are recommended. Thanks to the Green Premium eco-label, detailed information on material contents, environmental impact, and circular economy which support your sustainability goals can be obtained.