Schneider Electric BMH1001T17A1A Servo motor BMH -IEC 100 mm -3,4 Nm -6000 rpm -eje c chaveta -sin freno -doble conector recto - encoder abs MT 16b SinCos -IP65/IP65

Servo motor BMH from the Lexium 32 series of servo drives. The BMH series of three-phase AC servo motors features a medium rotor inertia and is perfectly adapted for applications with high loads. Thanks to winding technology, a very high power density is achieved in a compact design. This servo has a nominal continuous stall torque of 3.4 Nm and achieves a peak torque of 10.2 Nm. Its rated speed depends on the supply voltage and can reach up to 4000 rpm. A voltage-dependent rated power of up to 1200 W results. The built-in encoder is designed as a multisturn with 16 periods/revolution (16x1024x4096) as SinCos Hiperface. The electrical connection is made via 2x M23 connectors in a straight design. For mounting, the motor flange is 100 mm. The drive shaft has a diameter of 19 mm. The shaft end is designed as a keyway and conforms to the protection rating IP54. The motor housing is rated to IP65. There is no holding brake. For the operation of the synchronous motor, the Lexium series LXM32 servo controllers are recommended. Thanks to the Green Premium environmental label, you can get detailed information about material contents, environmental impacts, and the circular economy that support your sustainability goals.