Schneider Electric BMH1001T12A1A Servo motor BMH - IEC 100 mm - 3,4 Nm - 6000 rpm -eje c chaveta -sin freno -doble conector recto -encoder abs MT 128b SinCos -IP54

Servo motor BMH from the Lexium 32 servo drive series. The BMH series of three-phase AC servo motors features a medium rotor moment of inertia and is perfectly adapted for applications with high loads. Thanks to the winding technology, very high power density is achieved in a compact design. This servo has a nominal continuous stall torque of 3.4 Nm and achieves a peak torque of 10.2 Nm. Its rated speed depends on the supply voltage and can reach up to 4000 rpm. There is a voltage-dependent rated power of up to 1200 W. The built-in encoder is designed as a multiturn with 128 periods per revolution (128x1024x4096) in SinCos Hiperface format. The electrical connection is made using 2x M23 connectors in a straight design. For mounting, the motor flange is 100 mm. The drive shaft has a diameter of 19 mm. The shaft end is designed as a keyway and conforms to IP54 protection. The motor housing meets IP65 protection type. There is no holding brake. For the operation of the synchronous motor, the LXM32 series Lexium servo amplifiers are recommended. Thanks to the Green Premium eco-label, detailed information about material contents, environmental impact and circular economy can be obtained to support your sustainability goals.