Schneider Electric BMH1001T01A1A Servo motor BMH -IEC 100 mm -3,3 Nm -6000 rpm -eje liso -sin freno -doble conector recto - encoder abs ST 128b SinCos -IP65/IP65

Servo motor BMH from the Lexium 32 servo drive series. The BMH series of three-phase AC servo motors has a medium rotor moment of inertia and is perfectly suited for applications with high loads. Thanks to winding technology, a very high power density is achieved in a compact design. This servo has a nominal continuous stall torque of 3.4 Nm and reaches a peak torque of 10.2 Nm. Its rated speed is up to 4000 rpm depending on the supply voltage. There is a voltage-dependent nominal power of up to 1200 W. The built-in encoder is designed as singleturn with 128 periods per revolution (128x1024) as SinCos Hiperface. The electrical connection is made via 2x M23 connectors in a straight design. For mounting, the motor flange is 100 mm. The drive shaft has a diameter of 19 mm. The shaft end is smooth and conforms to protection class IP54. The motor housing corresponds to protection class IP65. There is no holding brake present. For the operation of the synchronous motor, the servo amplifiers of the Lexium series LXM32 are recommended. The Green Premium eco label allows you to receive detailed information on material contents, environmental impacts, and circular economy, supporting your sustainability goals.