Schneider Electric BMH1001P27F2A Servo motor BMH - IEC 100 mm - 3,3 Nm - 6000 rpm -eje liso -con freno -doble conector acodado orientable -encoder abs MT 16b SinCos -IP65/IP67

BMH series servo motor for the Lexium 32 servo drive range. The BMH series of three-phase AC servo motors has a medium rotor moment of inertia and is perfectly adapted for applications with high loads. Thanks to the winding technology, a very high power density is achieved in a compact design. This servo has a nominal holding torque of 3.4 Nm and achieves a peak torque of 10.2 Nm. Its rated speed is up to 5000 RPM depending on the supply voltage. The nominal power depends on the voltage and can reach up to 1520 W. The built-in encoder is designed as a multiturn with 16 periods per revolution (16x1024x4096) in SinCos Hiperface format. The electrical connection is made via 2x M23 connectors angled at 90 degrees and rotatable. For mounting, the motor flange is 100 mm. The drive shaft has a diameter of 19 mm. The shaft end is smooth and designed to conform to the IP65 protection standard. The motor housing also meets the IP65 protection standard. An integrated holding brake is provided. For the operation of the synchronous motor, we recommend the Lexium series LXM32 servo amplifiers. Thanks to the Green Premium eco-label, you can receive detailed information about material contents, environmental impacts, and the circular economy that support your sustainability goals.