Schneider Electric BMH1001P26F1A Servo motor BMH - IEC 100 mm - 3,3 Nm - 6000 rpm -eje liso -con freno -doble conector recto -encoder abs ST 16b SinCos -IP65/IP67

The BMH servo motor from the Lexium 32 servo drive series. The BMH series of three-phase AC servo motors has a medium rotor moment of inertia and is perfectly adapted for applications with high loads. Thanks to the winding technology, there is a very high power density in a compact design. This servo has a nominal continuous stall torque of 3.4 Nm and achieves a peak torque of 10.2 Nm. Its rated speed reaches up to 5000 rpm depending on the supply voltage. It results in a voltage-dependent rated power of up to 1520 W. The built-in encoder is designed as a single turn with 16 periods per revolution (16x1024) as SinCos Hiperface. The electrical connection is made via connectors 2x M23 in a straight version. For mounting, the motor flange is 100 mm. The drive shaft has a diameter of 19 mm. The shaft end is smooth and complies with the protection rating IP65. The motor housing is also rated IP65. An integrated holding brake is included. The Lexium series LXM32 servo amplifiers are recommended for the operation of the synchronous motor. Thanks to the Green Premium eco-label, you can receive detailed information on material content, environmental impacts, and circular economy that support your sustainability goals.