Schneider Electric BMH1001P17A1A Servo motor BMH -IEC 100 mm -3,3 Nm -6000 rpm -eje c chaveta -sin freno -doble conector recto - encoder abs MT 16b SinCos -IP65/IP65

BMH series servo motor from the Lexium 32 servo drive range. The BMH series of three-phase AC servo motors feature a medium rotor moment of inertia and are perfectly adapted for applications with high loads. Thanks to the winding technology, there is a very high power density in a compact design. This servo has a nominal continuous stall torque of 3.4 Nm and achieves a peak torque of 10.2 Nm. Its rated speed is up to 5000 rpm depending on the supply voltage. There is a voltage-dependent rated output up to 1520 W. The built-in encoder is designed as multiturn with 16 periods/revolution (16x1024x4096) as SinCos Hiperface. The electrical connection is made via 2x M23 connectors in a straight design. The motor flange has a 100 mm diameter for mounting. The drive shaft has a diameter of 19 mm. The shaft end is designed as a keyway and complies with the IP54 protection type. The motor housing conforms to the IP65 protection level. There is no holding brake present. For the operation of the synchronous motor, the Lexium series LXM32 servo amplifiers are recommended. Thanks to the Green Premium eco-label, you can obtain detailed information on material contents, environmental impacts and circular economy, which support your sustainability goals.