Schneider Electric BMH1001P16A1A Servo motor BMH - IEC 100 mm - 3,3 Nm - 6000 rpm -eje c chaveta -sin freno -doble conector recto -encoder abs ST 16b SinCos -IP54

Servomotor BMH of the Lexium 32 servo drives series. The BMH range of three-phase AC servomotors features a medium rotor moment of inertia and is perfectly adapted for applications with high loads. Thanks to the winding technology, there is a very high power density in a compact design. This servo has a nominal continuous stall torque of 3.4 Nm and achieves a peak torque of 10.2 Nm. Its rated speed is up to 5000 rpm depending on the supply voltage. A voltage-dependent rated power of up to 1520 W results. The built-in encoder is designed as a single-turn with 16 periods/revolution (16x1024) as SinCos Hiperface. The electrical connection is made via 2x M23 connectors in a straight design. For mounting, the motor flange is 100 mm. The drive shaft has a diameter of 19 mm. The shaft end is designed as a feather key and conforms to protection class IP54. The motor housing complies with protection class IP65. There is no holding brake present. The Lexium series LXM32 servo amplifiers are recommended for the operation of the synchronous motor. Thanks to the Green Premium ecolabel, you can obtain detailed information about material contents, environmental impacts, and the circular economy that support your sustainability goals.