Schneider Electric BMH0703P36A2A Servo motor BMH - IEC 070 mm - 3,4 Nm - 8000 rpm -eje c chaveta -sin freno -doble conector acodado orientable -encoder abs ST 16b SinCos -IP65/IP67

Servo motor BMH in the Lexium 32 series of servo drives. The BMH series of three-phase AC servo motors have a medium rotor inertia and are perfectly suited for high-load applications. Due to the winding technology, there is a high power density in a compact design. This servo has a nominal holding torque of 3.4 Nm and reaches a peak torque of 10.2 Nm. Depending on the supply voltage, its rated speed can reach up to 6500 rpm. This results in a voltage-dependent rated power of up to 1540 W. The built-in encoder is a single-turn with 16 periods per revolution (16x1024) designed as SinCos Hiperface. The electrical connection is made via 2x M23 connectors, angled and rotatable by 90 degrees. For mounting, the motor flange is 70 mm. The drive shaft has a diameter of 14 mm. The shaft end is designed as a keyway and complies with IP65 protection rating. The motor housing also complies with the IP65 protection class. There is no holding brake present. For operating the synchronous motor, we recommend the Lexium series LXM32 servo amplifiers. With the Green Premium eco-label, you can get detailed information on material content, environmental impacts, and circular economy that support your sustainability goals.