Schneider Electric BMH0703P11F1A Servo motor BMH -IEC 070 mm -3,4 Nm -8000 rpm -eje c chaveta -con freno -doble conector recto - encoder abs ST 128b SinCos -IP65/IP65

Servo motor BMH from the Lexium 32 servo drive series. The BMH series of three-phase AC servo motors features a medium rotor inertia and is ideally suited for applications with high loads. Thanks to the winding technology, a very high power density is achieved in a compact design. This servo has a nominal continuous standstill torque of 3.4 Nm and can achieve a peak torque of 10.2 Nm. Its nominal speed depends on the supply voltage and can go up to 6500 RPM. The voltage-dependent nominal power is up to 1540 W. The built-in encoder is designed as a single-turn with 128 periods/revolution (128x1024) as SinCos Hiperface. The electrical connection is made via 2x M23 connectors in a straight design. For mounting, the motor flange is 70 mm. The drive shaft has a diameter of 14 mm. The end of the shaft is designed as a feather key in accordance with the protection type IP54. The motor housing complies with the protection class IP65. An holding brake is integrated. Drive amplifiers from the Lexium series LXM32 are recommended for operating the synchronous motor. Thanks to the Green Premium environmental label, you can get detailed information on material content, environmental impact, and circular economy that support your sustainability goals.