Schneider Electric BMH0702T31A2A Servo motor BMH - IEC 070 mm - 2,5 Nm - 8000 rpm -eje c chaveta -sin freno -doble conector acodado orientable -encoder abs ST 128b SinCos -IP65/IP67

The BMH series servo motor from the Lexium 32 range of servo drives. The BMH series of three-phase AC servo motors has a medium rotor inertia and is perfectly suited for applications with high loads. Thanks to the winding technology, a very high power density is achieved in a compact design. This servo has a nominal continuous stall torque of 2.48 Nm and reaches a peak torque of 7.44 Nm. Its rated speed is up to 5000 rpm, depending on the supply voltage. This results in a voltage-dependent nominal output power of up to 1080 W. The built-in encoder is designed as single-turn with 128 periods per revolution (128x1024) as SinCos Hiperface. The electrical connection is made via 2x M23 connectors, angled at 90 degrees and rotatable. The motor flange for mounting is 70 mm. The drive shaft has a diameter of 11 mm. The shaft end is designed as a keyway and conforms to IP65 protection. The motor housing complies with IP65. There is no holding brake. For the operation of the synchronous motor, the LXM32 series of servo amplifiers from Lexium is recommended. Thanks to the Green Premium environmental label, you can obtain detailed information on material content, environmental impact, and circular economy to support your sustainability goals.