Schneider Electric BMH0702T01A1A Servo motor BMH - IEC 070 mm - 2,5 Nm - 8000 rpm -eje liso -sin freno -doble conector recto -encoder abs ST 128b SinCos -IP54

Servomotor BMH of the Lexium 32 servo drive series. The BMH series of three-phase AC servomotors has a medium rotor inertia and is perfectly adapted for applications with high loads. The winding technology results in very high power density in a compact design. This servo has a nominal continuous stall torque of 2.48 Nm and reaches a peak torque of 7.44 Nm. Its nominal speed is up to 5000 rpm depending on the supply voltage. It has a voltage-dependent rated power of up to 1080 W. The built-in encoder is designed as a single turn with 128 periods/revolution (128x1024) as SinCos Hiperface. The electrical connection is made via 2x M23 connectors in a straight design. The motor flange is 70 mm for mounting. The drive shaft has a diameter of 11 mm. The shaft end is smooth and conforming to protection class IP54. The motor housing is in accordance with protection class IP65. There is no holding brake available. For the operation of the synchronous motor, the Lexium series LXM32 servo amplifiers are recommended. Thanks to the Green Premium eco-label, you can get detailed information on material contents, environmental impacts and the circular economy to support your sustainability goals.