Schneider Electric BMH0702P31A2A Servo motor BMH - IEC 070 mm - 2,5 Nm - 8000 rpm -eje c chaveta -sin freno -doble conector acodado orientable -encoder abs ST 128b SinCos -IP65/IP67

Lexium 32's BMH series servo motors are three-phase AC servo motors with a medium rotor inertia, perfectly adjusted for high-load applications. Thanks to the winding technology, there's a very high power density in a compact design. This servo has a nominal continuous standstill torque of 2.48 Nm and reaches a peak torque of 7.44 Nm. Its nominal speed is up to 7000 rpm depending on the supply voltage. It has a voltage-dependent nominal power of up to 1380 W. The built-in encoder is executed as single-turn with 128 periods per revolution (128x1024) in a SinCos Hiperface design. The electrical connection is made via 2x M23 connectors, angled at 90 degrees and rotatable. For mounting, the motor flange is 70 mm. The drive shaft has a diameter of 11 mm. The shaft end is designed as a keyway in accordance with protection class IP65. The motor housing conforms to protection class IP65. There is no holding brake. For the operation of the synchronous motor, the servo amplifiers of the Lexium series LXM32 are recommended. Thanks to the Green Premium eco-label, detailed information on material contents, environmental impacts, and the circular economy can be obtained to support your sustainability goals.